Method of using press brake machine
According to the processing of ordinary hydraulic bending machine
press brake machine
Q235 sheet to do simple introduction:
1, the first is connected to the power supply of press brake machine, open the key switch on the control panel, and then press the pump start.
2, stroke adjustment, press brake machine must be used to pay attention to the regulation of stroke in bending test before you. press brake machine die downward to the bottom must ensure that there is a thick clearance. Otherwise it will cause damage to the mold and machine. The adjustment of the trip is electric quick adjustment and manual adjustment.
3, bending notch, notch in general to choose the thickness 8 times the width of the. Such as plate bending 4mm, need to choose about 32 slot.
4, after the block adjustment generally has electric quick adjustment and manual tuning method, with shears.
5, on the pedal switch started to bend, bending machine and cutting machine is different, can loosen, loosen the foot bending machine will stop, and step down to.