Sales & Support: Request A Quote
Home News

The rules for safe operation of press brake machine

Good quality shearing machine for sales
Good quality shearing machine for sales
CN BEST is good,I have cooperated with them for almost 8 years,My clients trust their quality,I like their good service.

—— Alessio Costa

Nice factory,they never let me down,I will keep on buying from them.

—— John Smith

I'm Online Chat Now
Company News

The rules for safe operation of press brake machine

The rules for safe operation of press brake machine
The rules for safe operation of press brake machine
1, strictly abide by the rules of safe operation of press brake machine, according to the provisions of wear labor protection supplies;
2, must be carefully checked before starting the motor, switch, circuit and ground is normal and stable, the control site inspection equipment, the button is in the correct position lag;
3, check on the coincidence degree and strong mould; check the positioning device meets the processing requirements;
In 4, the skateboard and the positioning shaft is not in the origin of the state, running back to the origin of program;
5, after the start-up equipment idle running 1 - 2 minutes, skateboard full stroke movement 2 - 3 times, if there is abnormal sound or failure should stop immediately, troubleshooting everything isnormal;
6, when 1 people work by the unified command, the operator and the feeding pressing personnel closely, ensure personnel are issued in a safe location side bending signal;
7, plate bending must be compacted, in order to prevent bending of sheet up;
8, adjustable sheet metal mould must cut off the power, stop running;
9 in the opening, change under variable when there is any material contact with the lower die is not allowed;
10, when press brake machine is running, the machine is not allowed to stand on the back;
11, is alone in the end pressure plate material;
12, when running the workpiece or mould is not found, should stop correction, prohibit the use of hand correction operation to prevent hand injury;
13, prohibit super thick iron or fold quenched steel, high alloy steel, square steel and more than the performance of plate bending machine of sheet metal, so as not to damage the machine;
Coincidence degree 14, always check the upper and lower mold; pressure gauge instructions are in accordance with the provisions;
15, abnormal immediately shut down, check and promptly eliminate;
16, before the shutdown, on both sides of the cylinder mold bottom placed on the skateboard fell topieces will block;
17, the first exit Control system After the procedure, cut off the power supply of press brake machine
Pub Time : 2016-04-30 11:22:27 >> News list
Contact Details
Anhui Tongkuai NC Machine Tool Manufacturing Co.,Ltd

Contact Person: Mr. Frank Zhang

Tel: 86-151-78585666

Fax: 86-182-26752602

Send your inquiry directly to us (0 / 3000)